Those who prefer Intek Projects
Established in 1957 in Tripoli, Al Fateh University is the biggest higher education institution with its 1.600.000 m2 of residing area. Faculties of Engineering project constructed by Ronesans Construction consist of 3 main blocks and total construction area is 162.900 m2.
Al-Tahadi University project, which has 220.000 m2 of construction area in total with its 8 faculties and 5 service buildings, is located in Sirte city of Libya.
Gintas Construction preferred Intek formwork systems on Ataturk Culture Center project constructed in Bursa. The walls in this project were shaped like both eliptic and conical. In a word, the diameters of walls were changeable on not only plan but also cross section. In consequence of evaluations with customer, it was decided that those walls should be sorted out with 380 cm height of adjustable circular wall formworks.
Due to being a penal institution, there is a large quantity of reinforced concrete shearwall on the project which has totally 36.000 m2 of construction area. On A,B and C blocks, the reinforced concrete shearwalls, having 50.000 m2 length in metres, were formed with just 530 m2 of Panemax wall formwork
Istanbul European Side Justice Hall project is the largest courthouse in Europe. The construction consists of totally 20 blocks including 6 main as well as other large and small ones. It has approximately 330.000 m2 of slab area. At first stage, necessary formwork systems were supplied for primary two blocks in the direction of working schedule.
Lebanon University project is the one consisting of totally 12 blocks including 6 of them in 9-storey and the rest in 3-storey. Total construction area, including precast and casting together, is 56.143 m2. Slab formworks were sorted out with CLK tower slab formwork system. On slabs and beams were used H20 wooden beams as main and secondary beam functions.
The project having been constructed in Franceville city in the memory of Former President, Mr. Haci Omer Bongo, is among the most prestigious projects of Gabon. The supervising firm, as employer’s representative of the project constructed in accordance with French norms, was American Benchtel company. The formwork systems to be used in these kinds of international projects should be conformed with world standards. Intek prepared a display book to indicate that and the brand name of Intek Formwork was approved by Benchtel.
Within the scope of the project, there are 3 ministry buildings. Those are 200-person capacity of Ministry of Automobile and Transportation headquarter, 168-person capacity of General Directorate of Highways and 253-person capacity of Ministry of Railroads headquarter. As part of headquarters, there are a conference hall, a dining hall, a kitchen and equipments, a library and a parking lot.
When it was specified the formwork needs of these structures which started at different times, both site management and Intek’s project engineers and supervisors performed a very successful team work together and provided optimum solutions by utilizing available formwork stock up to the little part at every stages.
The project, which has approximately 100.000 m2 of indoor area, consists of totally 11 floors, 3 of which is underground. Within the scope of the project, there are 520 offices, 12 president of commission rooms, a 500-person meeting room, 9 commission meeting rooms, 4 visitors reception rooms, a press meeting room, 3 dining halls, amenity spaces, a 21-car capacity parking lot, and 568-car capacity parking garage.